|
Another wiring challenge was finding a good spot
for the XM antenna. It needs to be somewhere unobstructed so you get clear
reception, so the roof is an obvious choice. I wanted to use my third brake
light as the "point of entry" for the antenna wire. Pulling the wire
through the rubber cable boot between the rear hatch and the body was tough.
But my trusty wire hanger and a liberal glob of Vaseline helped me pull it
through with no problems. Once inside the cabin, I routed the wire through the
left rear quarter panel, down by the driver's side rear door, and under the
driver's seat. This was easily done since all of the interior trim panels were
already removed for my
vinyl floor project.
|
